Search results for "niobium oxide"

Light induced electropolymerization of poly(3,4-ethylenedioxythiophene) on niobium oxide

2010

Abstract The photoelectrochemical polymerization of poly(3,4-ethylenedioxythiophene), PEDOT, was successfully realized on anodic film grown to 50 V on magnetron sputtered niobium. Photocurrent Spectroscopy was employed to study the optical properties of Nb/Nb 2 O 5 /PEDOT/electrolyte interface in a large range of potential, and to get an estimate of the band gap and flat band potential of both the oxide and the polymer. Scanning Electron Microscopy was used to study the morphology of PEDOT. Both the optical and morphological features of the photoelectrochemically grown polymer were compared with those showed by PEDOT electropolymerized on gold conducting substrate.

Niobium phosphates as new highly selective catalysts for the oxidative dehydrogenation of ethane

2011

Several niobium phosphate phases have been prepared, fully characterized and tested as catalysts for the selective oxidation of ethane to ethylene. Three distinct niobium phosphate catalysts were prepared, and each was comprised predominantly of a different bulk phase, namely Nb(2)P(4)O(15), NbOPO(4) and Nb(1.91)P(2.82)O(12). All of the niobium phosphate catalysts showed high selectivity towards ethylene, but the best catalyst was Nb(1.91)P(2.82)O(12), which was produced from the reduction of niobium oxide phosphate (NbOPO(4)) by hydrogen. It was particularly selective for ethylene, giving ca. 95% selectivity at 5% conversion, decreasing to ca. 90% at 15% conversion, and only produced low l…

Amorphous semiconductor—electrolyte junction. Impedance study on the a-Nb2 O5—electrolyte junction

1990

Abstract A systematic study of the impedance behaviour of the anodic niobium oxide film/aqueous electrolyte interface was carried out using the lock-in technique at different signal frequencies. The dependence of both components of the impedance on the electrode potential and on frequency is analysed by taking into account the amorphous nature of the films. The lack of long-range order in these oxide layers modifies the physical picture in respect to the case of single crystal semiconductors. A new equivalent circuit has been assumed, based on recent theory of an amorphous semiconductor Schottky barrier. Such a new approach allows the characterization of the interface and the determination …

Catalytic Conversion of Glucose and Chlorella sp. into Furans in the Presence of Niobium Oxide

2023

A series of Nb2O5 solid catalysts have been prepared to be used for the catalytic dehydration of glucose and sugars from algae Chlorella sp. into added value furans. The glucose transformation gave rise to 5-hydroxymethylfurfural (5-HMF). Chlorella sp. was used in the same catalytic conditions to be valorised to furans. By preliminary studies we concluded that the algae aqueous suspension needed a previous treatment in the presence of SiO2 pellets to liberate the carbohydrates that in the catalytic reaction in the presence of Nb2O5 materials gave rise 5-HMF and furfural. The best operative conditions and Nb2O5 catalysts were individuated. The most performant Nb2O5 catalyst also showed an ex…

Mechanical, Kinetic and Morphological Correlations during the Scale Growth of Niobium and Zirconium Oxides

2001

Oxidation of niobium at 700°C and zirconium at 850°C, in air or oxygen pressures from 20 to I 000 hPa, lead to the formation in one case of a stratified Nb 2 O 5 oxide scale and in the other case a more compact ZrO 2 oxide scale. Analyses of the evolutions of phases, crystalline textures and mechanical stresses during oxidation are determined by X-ray diffraction techniques. Interactions between chemical processes, crystalline building and mechanical processes constitute together the driving force of the reaction and can explain the differences in morphologies of oxide scales.

ELECTROCHEMICAL FABRICATION OF METAL/OXIDE/CONDUCTING POLYMER JUNCTIONS FOR ELECTRONIC DEVICES

2014

Catalytic Dehydration of Fructose to 5-Hydroxymethylfurfural in Aqueous Medium over Nb2O5-Based Catalysts

2021

The catalytic dehydration of fructose to 5-hydroxymethylfurfural (HMF) in water was performed in the presence of pristine Nb2O5 and composites containing Nb and Ti, Ce or Zr oxides. In all experiments, fructose was converted to HMF using water as the solvent. The catalysts were characterized by powder X-ray diffraction, scanning electron microscopy, N2 physical adsorption, infrared and Raman spectroscopy and temperature-programmed desorption of NH3. Experimental parameters such as fructose initial concentration, volume of the reacting suspension, operation temperature, reaction time and amount of catalyst were tuned in order to optimize the catalytic reaction process. The highest selectivit…

High-speed solid state fluorination of Nb2O5 yields NbO2F and Nb3O7F with photocatalytic activity for oxygen evolution from water

2021

Solid state reactions are slow because the diffusion of atoms or ions through the reactant, intermediate and crystalline product phases is the rate-limiting step. This requires days or even weeks of high temperature treatment, and consumption of large amounts of energy. We employed spark-plasma sintering, an engineering technique that is used for high-speed consolidation of powders with a pulsed electric current passing through the sample to carry out the fluorination of niobium oxide in minute intervals. The approach saves time and large amounts of waste energy. Moreover, it allows the preparation of fluorinated niobium oxides on a gram scale using poly(tetrafluoroethylene) (®Teflon) scrap…

Electrochemical growth and physico-chemical characterization in organic medium of Nb2O5 thin films

2008

Investigations about the energetics and the electrical properties of niobium thin film, electrochemically grown, were performed in an organic solution of acetonitrile and lithium perchlorate. The study of the energetics of the Nb O /organic solution interface was performed by means of a non-destructive optical technique, photocurrent 2 5 spectroscopy. By means of this technique, it was possible estimating the value of the flat band potential and locating conduction and valence band. A more cathodic value of flat band potential in respect with acidic solution was found in organic medium. From impedance spectra, the electrical circuit that gives best fitting values is constituted by two resis…